CJC-1295 (No DAC), Ipamorelin, GHRP-2 (Blend)

Three Pathways. One Vial. The Ultimate GH Research Stack.

best peptide site You’ve run CJC-1295 with a single GHRP. You know the synergy works. But what if you could have the best of both GHRP worlds?

Ipamorelin gives you clean, prolonged GH release with no side effects. GHRP-2 gives you potent, high-amplitude pulses. And CJC-1295 (No DAC) amplifies both.

That’s the CJC-1295 (No DAC), Ipamorelin, GHRP-2 (Blend) .

Three peptides. One vial. A 1:1:1 ratio designed for researchers who want to study maximal GH pulsatility without choosing between potency and cleanliness.

This isn’t for beginners. This is for advanced peptide science researchers who understand that different GHRPs trigger GH release through the same receptor but produce different kinetic profiles.

Let’s break down what makes this triple blend unique.

---

What’s Actually in the Vial?

Straight facts. No mystery fillers.

Lyophilized powder. Sterile. ≥99% purity for all three peptides. Third-party tested. Vacuum-sealed amber glass vial.

Three peptides. One vial. Balanced triple ratio.

That’s advanced peptide science.

---

Why Three Peptides? (The Enthusiast Take)

You know the individual players. Here’s why putting them together creates something new.

CJC-1295 (No DAC) is your amplifier. It binds to GHRH receptors on the pituitary and turns up the volume on any GH release signal. Without CJC, GHRPs still work. With CJC, the same GHRP dose produces a much larger GH pulse.

GHRP-2 is your high-output specialist. It’s the most potent GHRP milligram for milligram — about 2-3x stronger than GHRP-6. It produces a sharp, high-amplitude GH spike within 30 minutes. But it does cause mild prolactin and cortisol elevation.

Ipamorelin is your endurance specialist. It produces a lower peak but longer duration of GH release (60-90 minutes vs. 30-45 minutes). And it has virtually no effect on prolactin, cortisol, or appetite.

Together: GHRP-2 gives you the sharp peak. Ipamorelin gives you the prolonged tail. CJC-1295 amplifies both. The result is a GH pulse that’s both higher and longer than any two-peptide combination.

Think of it as a research tool that lets you study both the amplitude and duration of GH release from a single administration.

That’s not hype. That’s synergistic peptide science.

---

The Technical Expert Breakdown (Still Friendly)

For those who want mechanisms without the lecture:

CJC-1295 (No DAC) – GHRH analog

• Binds to GHRH receptors on pituitary somatotrophs

• Amplifies amplitude of endogenous GH pulses

• No DAC = ~30-minute half-life → clean pulsatile release

• Does not interfere with natural GH feedback loops

• Synergizes with any GHRP

GHRP-2 (Pralmorelin) – Potent GHRP

• Binds to ghrelin (GHS-R1a) receptors

• 2-3x more potent than GHRP-6

• Sharp peak GH release at 30-45 minutes

• Mild prolactin and cortisol elevation (less than GHRP-6)

• Short duration of action (~45-60 minutes total)

Ipamorelin – Clean GHRP

• Binds to same ghrelin receptors but with different kinetics

• Lower peak but longer duration (60-90 minutes total)

• No significant prolactin elevation

• No significant cortisol elevation

• No appetite stimulation

Triple synergy mechanism:

• GHRP-2 rapidly occupies ghrelin receptors → sharp GH spike

• Ipamorelin maintains receptor activation → prolongs release

• CJC-1295 amplifies both signals → higher overall GH output

The three peptides compete for the same receptor but produce different kinetic profiles. The result is a GH pulse that is:

• Higher than GHRP-2 alone

• Longer than Ipamorelin alone

• Amplified beyond what any two-peptide combination achieves

That’s the kind of advanced peptide science that requires precise stoichiometry — which is why this blend exists.

---

Reconstitution & Dosing (Laid-Back Version)

Same simplicity as our two-peptide blends. Just three peptides in one vial.

What you need:

• Bacteriostatic water

• Insulin syringe (0.5ml or 1ml, 30–31 gauge)

• Alcohol wipes

Quick math:

Add 2ml of bacteriostatic water to the vial.

Now each 0.1ml (10 units on a 1ml syringe) contains:
→ ~167mcg CJC-1295 (No DAC)
→ ~167mcg Ipamorelin
→ ~167mcg GHRP-2

Common dosing for research protocols:

Best practice: Administer on an empty stomach (at least 2 hours after eating, 30 minutes before). GH release is suppressed by glucose and insulin.

Timing protocols:

• Morning: Upon waking, before breakfast

• Post-workout: After training, before eating

• Bedtime: 60 minutes before sleep (the prolonged Ipamorelin tail overlaps with natural nocturnal GH peak)

Note: Because this blend contains GHRP-2, there is mild prolactin and cortisol elevation — though less than GHRP-6. Monitor research subjects accordingly.

Store in refrigerator after reconstitution. Use within 30 days.

Reminder: This information is for educational and research purposes only. Always follow institutional guidelines.

---

Who Is This Triple Blend For?

• Advanced researchers studying GH pulse kinetics

• Comparative studies examining amplitude vs. duration

• Researchers who want maximal GH output without running multiple injections

• Studies requiring single-administration GH pulses with both high peak and prolonged tail

• Endocrinology labs with experience in GH secretagogue research

This blend is not for:

• First-time peptide researchers (start with single peptide or two-peptide blend)

• Studies requiring zero prolactin/cortisol elevation (use CJC + Ipamorelin only)

• Appetite studies where GHRP-2’s mild hunger effect is a confounder

---

Triple Blend vs. Two-Peptide Blends: Comparison

The triple blend doesn’t replace two-peptide blends — it adds a third option for researchers who want both high peak and long duration from a single injection.

---

Why These Ratios Matter

The 1:1:1 ratio (approximately 3.33mg each) is not arbitrary. It’s based on:

1. Receptor occupancy kinetics — GHRP-2 and Ipamorelin compete for the same ghrelin receptors. The 1:1 ratio allows both to contribute without one dominating.

2. CJC amplification — CJC-1295 amplifies both GHRP signals equally at this ratio.

3. Practical dosing — At 100-200mcg per peptide per dose, the total injection volume remains reasonable (0.06-0.12ml).

Deviating from this ratio would change the kinetic profile. That’s why we precision-blend.

---

What About Purity and Testing?

Triple the peptides means triple the testing.

Every batch of the CJC-1295 (No DAC), Ipamorelin, GHRP-2 (Blend) is tested by an independent, ISO-certified lab. You receive:

• HPLC purity report (≥99% for each of the three peptides)

• Mass spectrometry confirmation for all three

• Endotoxin and bioburden testing

• Amino acid analysis for each peptide

A scannable QR code on each vial links directly to batch-specific data.

That’s real peptide science transparency — at scale.

---

Storage & Handling

Allow vial to reach room temperature before adding bacteriostatic water. Swirl gently for 60-90 seconds — three peptides may take slightly longer to fully dissolve.

---

Frequently Asked Questions

Why combine Ipamorelin and GHRP-2? Don’t they compete for the same receptor?
Yes, they bind to the same ghrelin receptor. But they produce different kinetic profiles. In combination, GHRP-2 drives a sharp peak while Ipamorelin sustains the tail. The result is a GH pulse that’s both higher and longer than either alone. best peptide site

Is this blend more potent than CJC + GHRP-2 alone?
For total GH output, yes — but the difference is in the duration, not just the peak. If your research only cares about peak GH at 30 minutes, CJC + GHRP-2 is sufficient. If you care about total area under the curve (AUC), the triple blend is superior.

Does the Ipamorelin reduce the side effects of GHRP-2?
Partially. The prolactin and cortisol elevation from GHRP-2 still occurs, but at lower total GHRP-2 dose (3.33mg vs. 5mg in a two-peptide blend), the absolute elevation is less. For zero side effects, use CJC + Ipamorelin alone.

Can I use this blend for long-term research protocols?
Yes, but monitor prolactin and cortisol if running extended studies. The mild elevation from GHRP-2 is generally well-tolerated but should be documented.  best peptide site

How long does one 10mg vial last?
>At 100mcg of each, once daily: ~33 days.
>At 100mcg of each, twice daily: ~16 days.
>At 150mcg of each, once daily: ~22 days.
>At 167mcg of each, once daily: ~20 days.

Why empty stomach?
Same as all GH secretagogues — glucose and insulin suppress GH release. The appetite effect from GHRP-2 is mild, but fasting is still recommended for consistent results.

---

The Bottom Line

You’re not new to peptide science. You’ve run GHRPs before. You understand that different kinetic profiles answer different research questions.

The CJC-1295 (No DAC), Ipamorelin, GHRP-2 (Blend) gives you:

• Three complementary GH secretagogues in one vial

• Precise 1:1:1 ratio (approx. 3.33mg each)

• ≥99% purity, third-party tested for all three peptides

• No DAC for natural pulsatile rhythm

• GHRP-2 for high-amplitude peak

• Ipamorelin for prolonged duration

• CJC-1295 to amplify both

This is not a beginner’s blend. This is for researchers who want to study GH pulse kinetics at the next level — both the height of the peak and the length of the tail, from a single administration.

Research smart. Amplify everything. Study the whole curve.

---

This product is intended for laboratory research and scientific study purposes only. Not for human consumption or veterinary use outside of approved research protocols. Always comply with local regulations regarding peptide research. best peptide site

---